|
|
Cut 1D X 3.0 Antivirus Scan Results: - 100% Clean
Cut 1D X software
have been tested by programsbase.com team against viruses,
spyware, adware and was founded to be 100% clean.
We will recheck this software periodically to assure users that it remain clean.
Note: this award offered by programsbase.com
should be used only by the author/publisher of the Cut 1D X software.
|
Cut 1D X 3.0 Antivirus Report
Archive: cut1dx.zip
creating: Cut1DX/
creating: Cut1DX/CBuilder6/
inflating: Cut1DX/CBuilder6/About.cpp
inflating: Cut1DX/CBuilder6/About.ddp
inflating: Cut1DX/CBuilder6/About.dfm
inflating: Cut1DX/CBuilder6/About.h
inflating: Cut1DX/CBuilder6/Project1.bpr
inflating: Cut1DX/CBuilder6/Project1.cpp
inflating: Cut1DX/CBuilder6/Project1.res
inflating: Cut1DX/CBuilder6/Register.cpp
inflating: Cut1DX/CBuilder6/Register.ddp
inflating: Cut1DX/CBuilder6/Register.dfm
inflating: Cut1DX/CBuilder6/Register.h
inflating: Cut1DX/CBuilder6/Unit1.cpp
inflating: Cut1DX/CBuilder6/Unit1.ddp
inflating: Cut1DX/CBuilder6/Unit1.dfm
inflating: Cut1DX/CBuilder6/Unit1.h
creating: Cut1DX/Component/
inflating: Cut1DX/Component/cut1dx_dll.dll
inflating: Cut1DX/Component/cut1dx_dll.lib
creating: Cut1DX/Delphi7/
inflating: Cut1DX/Delphi7/About.ddp
inflating: Cut1DX/Delphi7/About.dfm
inflating: Cut1DX/Delphi7/About.pas
inflating: Cut1DX/Delphi7/Project1.cfg
inflating: Cut1DX/Delphi7/Project1.dof
inflating: Cut1DX/Delphi7/Project1.dpr
inflating: Cut1DX/Delphi7/Project1.res
inflating: Cut1DX/Delphi7/RegisterUnit.dfm
inflating: Cut1DX/Delphi7/RegisterUnit.pas
inflating: Cut1DX/Delphi7/Unit1.ddp
inflating: Cut1DX/Delphi7/Unit1.dfm
inflating: Cut1DX/Delphi7/Unit1.pas
creating: Cut1DX/Help/
inflating: Cut1DX/Help/Cut1DX.cnt
inflating: Cut1DX/Help/Cut1DX.GID
inflating: Cut1DX/Help/CUT1DX.HLP
inflating: Cut1DX/install.txt
inflating: Cut1DX/license.txt
inflating: Cut1DX/tested.txt
creating: Cut1DX/VB2005/
creating: Cut1DX/VB2005/Project1.NET/
inflating: Cut1DX/VB2005/Project1.NET/AboutBox1.Designer.vb
inflating: Cut1DX/VB2005/Project1.NET/AboutBox1.resx
inflating: Cut1DX/VB2005/Project1.NET/AboutBox1.vb
inflating: Cut1DX/VB2005/Project1.NET/AssemblyInfo.vb
inflating: Cut1DX/VB2005/Project1.NET/Form1.Designer.vb
inflating: Cut1DX/VB2005/Project1.NET/Form1.resx
inflating: Cut1DX/VB2005/Project1.NET/Form1.vb
creating: Cut1DX/VB2005/Project1.NET/My Project/
inflating: Cut1DX/VB2005/Project1.NET/Project1.log
inflating: Cut1DX/VB2005/Project1.NET/Project1.sln
inflating: Cut1DX/VB2005/Project1.NET/Project1.suo
inflating: Cut1DX/VB2005/Project1.NET/Project1.vbproj
inflating: Cut1DX/VB2005/Project1.NET/Project1.vbproj.user
inflating: Cut1DX/VB2005/Project1.NET/Register.Designer.vb
inflating: Cut1DX/VB2005/Project1.NET/Register.vb
creating: Cut1DX/VB6/
inflating: Cut1DX/VB6/Form1.frm
inflating: Cut1DX/VB6/Form1.frx
inflating: Cut1DX/VB6/Project1.vbp
inflating: Cut1DX/VB6/Project1.vbw
Scanning Cut1DX/Component/cut1dx_dll.dll
Cut1DX/Component/cut1dx_dll.dll: OK
Scanning Cut1DX/Component/cut1dx_dll.lib
Cut1DX/Component/cut1dx_dll.lib: OK
Scanning Cut1DX/CBuilder6/Register.cpp
Cut1DX/CBuilder6/Register.cpp: OK
Scanning Cut1DX/CBuilder6/About.h
Cut1DX/CBuilder6/About.h: OK
Scanning Cut1DX/CBuilder6/Unit1.h
Cut1DX/CBuilder6/Unit1.h: OK
Scanning Cut1DX/CBuilder6/Unit1.ddp
Cut1DX/CBuilder6/Unit1.ddp: OK
Scanning Cut1DX/CBuilder6/About.dfm
Cut1DX/CBuilder6/About.dfm: OK
Scanning Cut1DX/CBuilder6/Register.dfm
Cut1DX/CBuilder6/Register.dfm: OK
Scanning Cut1DX/CBuilder6/Register.h
Cut1DX/CBuilder6/Register.h: OK
Scanning Cut1DX/CBuilder6/Unit1.dfm
Cut1DX/CBuilder6/Unit1.dfm: OK
Scanning Cut1DX/CBuilder6/About.cpp
Cut1DX/CBuilder6/About.cpp: OK
Scanning Cut1DX/CBuilder6/Register.ddp
Cut1DX/CBuilder6/Register.ddp: OK
Scanning Cut1DX/CBuilder6/Unit1.cpp
Cut1DX/CBuilder6/Unit1.cpp: OK
Scanning Cut1DX/CBuilder6/Project1.cpp
Cut1DX/CBuilder6/Project1.cpp: OK
Scanning Cut1DX/CBuilder6/Project1.res
Cut1DX/CBuilder6/Project1.res: OK
Scanning Cut1DX/CBuilder6/About.ddp
Cut1DX/CBuilder6/About.ddp: OK
Scanning Cut1DX/CBuilder6/Project1.bpr
Cut1DX/CBuilder6/Project1.bpr: OK
Scanning Cut1DX/VB6/Project1.vbp
Cut1DX/VB6/Project1.vbp: OK
Scanning Cut1DX/VB6/Form1.frm
Cut1DX/VB6/Form1.frm: OK
Scanning Cut1DX/VB6/Form1.frx
Cut1DX/VB6/Form1.frx: OK
Scanning Cut1DX/VB6/Project1.vbw
Cut1DX/VB6/Project1.vbw: OK
Scanning Cut1DX/Help/Cut1DX.GID
Cut1DX/Help/Cut1DX.GID: OK
Scanning Cut1DX/Help/CUT1DX.HLP
Cut1DX/Help/CUT1DX.HLP: OK
Scanning Cut1DX/Help/Cut1DX.cnt
Cut1DX/Help/Cut1DX.cnt: OK
Scanning Cut1DX/Delphi7/Unit1.ddp
Cut1DX/Delphi7/Unit1.ddp: OK
Scanning Cut1DX/Delphi7/Project1.dpr
Cut1DX/Delphi7/Project1.dpr: OK
Scanning Cut1DX/Delphi7/About.dfm
Cut1DX/Delphi7/About.dfm: OK
Scanning Cut1DX/Delphi7/RegisterUnit.dfm
Cut1DX/Delphi7/RegisterUnit.dfm: OK
Scanning Cut1DX/Delphi7/RegisterUnit.pas
Cut1DX/Delphi7/RegisterUnit.pas: OK
Scanning Cut1DX/Delphi7/Project1.dof
Cut1DX/Delphi7/Project1.dof: OK
Scanning Cut1DX/Delphi7/Unit1.dfm
Cut1DX/Delphi7/Unit1.dfm: OK
Scanning Cut1DX/Delphi7/Unit1.pas
Cut1DX/Delphi7/Unit1.pas: OK
Scanning Cut1DX/Delphi7/Project1.res
Cut1DX/Delphi7/Project1.res: OK
Scanning Cut1DX/Delphi7/About.ddp
Cut1DX/Delphi7/About.ddp: OK
Scanning Cut1DX/Delphi7/About.pas
Cut1DX/Delphi7/About.pas: OK
Scanning Cut1DX/Delphi7/Project1.cfg
Cut1DX/Delphi7/Project1.cfg: OK
Scanning Cut1DX/license.txt
Cut1DX/license.txt: OK
Scanning Cut1DX/install.txt
Cut1DX/install.txt: OK
Scanning Cut1DX/VB2005/Project1.NET/Register.Designer.vb
Cut1DX/VB2005/Project1.NET/Register.Designer.vb: OK
Scanning Cut1DX/VB2005/Project1.NET/Form1.vb
Cut1DX/VB2005/Project1.NET/Form1.vb: OK
Scanning Cut1DX/VB2005/Project1.NET/Form1.Designer.vb
Cut1DX/VB2005/Project1.NET/Form1.Designer.vb: OK
Scanning Cut1DX/VB2005/Project1.NET/Project1.log
Cut1DX/VB2005/Project1.NET/Project1.log: OK
Scanning Cut1DX/VB2005/Project1.NET/AboutBox1.Designer.vb
Cut1DX/VB2005/Project1.NET/AboutBox1.Designer.vb: OK
Scanning Cut1DX/VB2005/Project1.NET/Project1.sln
Cut1DX/VB2005/Project1.NET/Project1.sln: OK
Scanning Cut1DX/VB2005/Project1.NET/Project1.suo
Cut1DX/VB2005/Project1.NET/Project1.suo: OK
Scanning Cut1DX/VB2005/Project1.NET/Form1.resx
Cut1DX/VB2005/Project1.NET/Form1.resx: OK
Scanning Cut1DX/VB2005/Project1.NET/Register.vb
Cut1DX/VB2005/Project1.NET/Register.vb: OK
Scanning Cut1DX/VB2005/Project1.NET/AssemblyInfo.vb
Cut1DX/VB2005/Project1.NET/AssemblyInfo.vb: OK
Scanning Cut1DX/VB2005/Project1.NET/AboutBox1.vb
Cut1DX/VB2005/Project1.NET/AboutBox1.vb: OK
Scanning Cut1DX/VB2005/Project1.NET/AboutBox1.resx
Cut1DX/VB2005/Project1.NET/AboutBox1.resx: OK
Scanning Cut1DX/VB2005/Project1.NET/Project1.vbproj
Cut1DX/VB2005/Project1.NET/Project1.vbproj: OK
Scanning Cut1DX/VB2005/Project1.NET/Project1.vbproj.user
Cut1DX/VB2005/Project1.NET/Project1.vbproj.user: OK
Scanning Cut1DX/tested.txt
Cut1DX/tested.txt: OK
Scanning cut1dx.zip
cut1dx.zip: OK
----------- SCAN SUMMARY -----------
Scanned directories: 10
Scanned files: 54
Infected files: 0
Data scanned: 1.55 MB
Time: 1.592 sec (0 m 1 s)
|
|
|
|
Get The Code for Cut 1D X 3.0 Antivirus Report:
|
|
|
|
You are welcome to display a text or a graphic link on your website and link-it
to this antivirus report page. Below are the codes: |
Graphic link:
|
Example:
|
|
Text link:
|
Example:
Cut 1D X Antivirus report from programsbase.com
|
|
|
|
|
Cut 1D X 3.0 Description:
Cut 1D X is an Automation Component used for obtaining optimal cutting designs of one dimensional pieces which may have angles different of 90 degrees at their extremities. Cut 1D X can be used for cutting linear pieces such as bars, pipes, tubes, steel bars, or any other material used by industrial applications. Cut 1D X can be used within any programming enviroment such as Delphi, C++Builder, Visual Basic, Visual C++ etc
Features:
Pieces to be cut can have angles different of 90 degrees at their extremities. A lot of material can be saved by properly matching 2 pieces having sharp extremities. For instance, if you match 2 pieces having 45 degrees at their extremities you will save as much as the height of the pieces.
Automatically compute the number of maximal repetitions for the current layout.
Compute the cutting order which is very important if the extremities have angles different of 90 degree. If all angles have 90 degrees the cutting order is not important.
Very fast algorithm (Solutions are obtained in seconds).
Compute the waste for the current piece.
Independent measurement metric.
Adjustable cutting blade thickness.
Adjustable optimization level.
Can be embedded within any language that supports automation (VB, Delphi, C++Builder, VC++, etc) and dynamic link library (dll).
|
Download link:  |
|
|
|
